How to use industrial coating supplies safely?

The safe use of industrial coating supplies requires attention to the following points:
Storage conditions: Industrial coatings should be stored in a well ventilated, dry, and clean place, away from sources of fire and other flammable materials. Avoid direct sunlight and high temperature environments, and keep the temperature within an appropriate range. Storage containers should be well sealed to prevent moisture and contamination.
Preparation before use: Ensure that the coating is within its expiration date and has not expired before use. Before use, the paint should be thoroughly stirred to ensure even distribution of pigments. Use matching diluents and tools to avoid using inappropriate diluents that may deteriorate the quality of the coating.
Construction environment: During construction, extreme temperatures (too high or too low) and humidity greater than 80% should be avoided to prevent affecting the drying speed and curing properties of the coating. Maintain good ventilation in the construction area and reduce the accumulation of harmful gases.
Personal protection: Wear personal protective equipment such as protective gloves, masks, and goggles during operation to protect operators from chemical hazards. Ensure good ventilation in the operating area and avoid open flames and other flammable materials.
Mixing and adjustment: Mix the main paint and curing agent according to the recommended ratio in the product manual, and stir evenly. Ensure that the mixed paint is used up within the specified time to prevent the curing agent gel. The mixed paint should be covered with plastic film or other appropriate covering to prevent surface peeling or contamination.
Painting technique: Choose appropriate painting methods such as brushing, spraying, or rolling to ensure a uniform and aesthetically pleasing paint film. Use a specialized water-based brush or select an appropriate spray gun diameter, adjust the spray gun diameter and pressure to ensure good spraying effect.
Safety and Health: During the construction process, maintain good indoor ventilation and avoid flammable materials such as open flames in the construction area. After the construction is completed, clean the construction tools and surrounding environment in a timely manner to ensure that the tools are clean and pollution-free.